How can I save electricity: simple recommendations that always work
Each month, paying public service accounts, each of us comes to the mind of how to save electricity.
After all, this expenses article is one of the most basic in the average family budget.Housing and service service rates are growing from year to year, so this question is quite relevant.
Proper use of lighting products
Where to start saving?Experts recommend replacing standard dimmers switches.These devices allow you to adjust the level of light.
After all, few people need a constant source of shiny light in the kitchen, bedroom, toilet or bathroom.As a rule, there is a very small power.
This is especially true for situations where you enter the room for a minute, watch a movie or play computer games.
You can continue to save by simply replacing common incandescent LED lamps.They contribute to much less energy consumption.
As for energy saving lamps, although it also contributes to reducing electricity costs, not all experts recommend them.
The fact is that, in their manufacture, manufacturers use mercury.
In addition, these lamps provide unnatural light, which may not affect vision in the best way and significantly reduce your acuity.Also, their life is not as reliable as the LED.
Despite the fact that the latter are quite high, they will be worth quickly.Using them, you can save on payment.
For example, a 4 W lamp will be 16 times more economical than a standard incandescent lamp of 75 watts.And it will give the sveta exactly the same amount.
Therefore, it is better to spend money on the LED lamp once than to pay several times more.
In addition, according to their manufacturing companies, their validity period is approximately 30,000 hours.At the average moment of the work process, 4 hours a day, this part of lighting is enough for over a ten years!
Also, they are safer than ordinary fire, because they hardly heat.Consider their acquisition as long -term investments and investments and they will be rewarded with more than.
You can save electricity by increasing the number of light sources throughout the perimeter of housing.
In this case, it will be easy to regulate the necessary lighting.For example, it is not necessary to light the light all over the bedroom or kitchen if you need to light the table.
Just turn on the wall sconces or a table lamp.
How to use the technique correctly?
The correct choice of equipment and electrical appliances will help to significantly minimize the cost of light:
- Remember that in stores you should choose a technique with the "A" class.This letter means that the iron, the refrigerator, the microwave etc.It consumes a small amount of electricity.Also, class “B” is not inferior to it.A big error will be the acquisition of devices with the "G" class as it is the most energy consumer.
- The size of the equipment should be chosen, depending on how many family members live in the apartment.For example, if the family is made up of two people, do not buy a washing machine with 5 kg load.Also, in this case, you will have to spend extra kilowatts of electricity, launching a half empty unit.This also applies to the purchase of a powerful refrigerator, which is not necessary in a two -person family.
Completely disconnect the electrical equipment if you do not use it for some time.Remember that a fork of a socket should always be turned off after the device!This is due to the fact that domestic equipment consumes electricity, even in waiting mode.Spend the same manipulations with loaders for telephone, laptops and other devices.
Proper use of the refrigerator to get rid of unnecessary expenses
When choosing a refrigerator in the store, give preference to what has no frost function.A technique with a similar brand will significantly reduce electricity consumption.
It is better to put the refrigerator in the coldest place of the kitchen.The installation of this equipment element near the stove will be wrong.It is recommended to put it outside the room.
It is she who is always bigger than others.This will allow the refrigerator not overheat.
As for freezer, it is better to keep it full of products.This supports the supplied temperature of electrical engineering is normal.
Also, make sure the freezer and refrigerator door are always in a closed state.
There is no need to put hot drinks, soups and other liquids on the refrigerator shelves.Leave the food in dishes, pots or a cooled pan on your own.It's free and you don't have to spend power and therefore pay more for additional kilowatts.It should be remembered that milk, juices, soups and other liquids should always be closed.Otherwise, moisture will evaporate, which will cause energy consumption.
The kitchen slab will help save
When buying an apartment, buy what is equipped with a gas stove.Preparing food is much more profitable than what works for electricity.
You can also reduce receipt payment by using an induction stove.
It has the lowest energy consumption, as this domestic device warms only the bottom of the pan, cauldron or vases.And in ordinary tiles, the burner heats up.
Also, remember that the diameter of the dishes for the preparation of various dishes should be a little more than the burner or combine it.
This will allow you to get a better heat transfer due to a closer adjustment to the burner.Cooking with a closed lid will help not to rotate electricity.
This method warms the foods in dishes, not air in the kitchen.
Always turn off the stove 5 minutes before the plate is prepared.Cook the high temperature for initial heating and reduce it.
The dish will reach the readiness and without the use of additional energy costs.
It is desirable to bring the water to boil to the gas, as a kettle that works from the network consumes a lot.Also, when working, it is involved in a very high power.
We wash, iron and save
When choosing a washing mode, remember that most post contain special components on your bases and erase underwear at low temperatures.
Therefore, it is not necessary to define it at most.The same rule applies to great revolutions.Also, do not throw a half -empty washing machine.It is better to save linen until completely loaded.
Residual heat can be used when passing.To do this, 10 minutes before the end of this procedure, turn off the iron.The device will be hot all this time.
Put food food on the iron plate.This will not spend electricity in warming its surface.
Other Effective Methods
The following recommendations will help minimize expenses:
- When decorating rooms (choosing furniture, wallpaper, floor, painting ceiling and walls), give preference to light tones.After all, the more color the color is lighter, the more the light is reflected.Also, to get a normal level of lighting, much less electricity will be required.
- The next recommendation will be banal, but with your help, you can also greatly reduce receipts.To save electricity, you need to wash the windows more often (depending on the degree of pollution).The fact is that polluted glass always passes almost half of the sun and natural light.As a result, it is necessary to configure dimmers in high power.The lamps should also be cleaned from the powder at least 2 times a month.In this case, it will all depend on the degree of pollution.
- If you are going to buy housing, consider that the south side is the brightest.This means that during the day there will be no additional lighting.
- Before activating divided systems or -conditioned air, you need to ensure that there are no drafts at home.Otherwise, this technique warms the street, not the rooms.Choose air conditioning, based on living room size.This will pay for the light much less.To activate the heater as little as possible, you can place plastic windows.Although this pleasure is not cheap over the years, it will be completely rewarded.
An outdated TV monitor or computer is better changed to the latest (LED, etc.).In the technique of old style, there is a great level of energy consumption.
The modern technique consumes very little electricity.Also do not turn on the scanner, the printer is unnecessary.